Portable Q-Switch ND:YAG Laser Tattoo Removal System
Therapy Principle:
1)Therapy of epidermis and dermis pigmentation
Utilizing the explosive effect of the Nd: YAG laser, the laser permeate the epidermis into the dermis which includes amount of pigment mass. Since the laser pulses in nanosecond but with super high energy, the shot pigment mass swell quickly and breaks into small pieces, which will be eliminated through metabolic system.
2)Carbon peeling treatment
The 1064nm wavelength laser directly acts on the carbon cream, blasting the toner, and the toner absorbs pore oil and dirt. At the same time, the laser can stimulate the dermis to produce a large amount of collagen, thereby achieving the function of shrinking pores and whitening.
Treatment Range:
1.Nevus of Ota and birthmark.
2.Pigment of epidermis and derma layer.
3.Body tattoo, eyebrow tattooand lips line.
4.Skin rejuvenation, skin whitening and resurfacing.
5.Freckles, Black spot, Age spots,Coffee spots and sun-burn spots.
Introduction To Machine Handle:
532nm: Red, orange, brown, stronger exfoliation
1064nm: Nlack, blue, deeper penetration Carbon peeling head.
Internal laser
532nm: Red, orange, brown, stronger exfoliation.
1064nm Head: Black, blue, deeper penetration
Carbon Peeling Head
System Advantages:
Light Weight:Small size and light weight, easy to transport, saving freight costs.
High Performance:Short pulse width(4ns) High power(940mj) Long lifespan
Handle Design:Cost-effective laser handle design
Easy To Use:Controllable spot size, easy to operate.
Good Cooling:High power built in water cooling system make the machine can be continuely use.
Color Display:Operation and parameter adjustment with 10.4 inch color TFT touch screen.
Precise:The laser generator is located at the handle position, which is not prone to polarization.
Portable Q-Switch ND:YAG Laser Tattoo Removal System Specification:
Laser type | ND:yag laser |
Input power | 600W |
Laser power | 300W |
Output system | Handle tool output |
Laser wavelength | 1064nm&532nm |
Treament head | Focus head 2 (1064nm&532nm)/Carbon peeling head |
Pulse width | 532nm:4ns/1064nm:4.5ns |
Energy | 100-2000mj (1064nm&532nm) |
Frequency | 1-10hz |
Coolant | Distilled water |
Screen | 10.4 inch touch color screen |
Cooling system | Air+water cooling |
Voltage | 110V±10%,60Hz /220V±10%,50Hz |
Machine weight | 40kg |
Machine size | 400mm*500mm*1100mm |
Package weight | 60kg |
Package size | 690mm*520mm*1240mm |
Treatment Steps:
01/Cleaning and get rid of hair on the treatment area.
02/Disinfection of treatment site.
03/The patient puts on a blindfold.
04/Operator wear protective glasses.
05/Adjusting parameters
06/Start treatment.
07/It is recommended to apply a medical mask after treatment.
Notice:
(1) It is recommended to use a medical mask one week after treatment
(2) It is recommended to use repair products and products that inhibit pigmentation after treatment
(3)Customers must pay attention to sun protection after treatment: physical sunscreen, masks, umbrellas, etc.
(4) The treatment interval is about one month. There are recommended treatment times in the parameter table. The doctor should judge whether more treatment times are needed according to the recovery situation.
(5) Do not eat spicy food or seafood within one week after treatment.
Find all our constructive solutions to carry out your projects. Know the technical specifications of each product here.